Most modular home buyers discover too late that factory specs don’t always match field performance. We’ve seen projects where insulation claimed at R-21 delivered closer to R-14 after installation — thermal bridging through steel framing eats into the rating before modules even leave the plant. That gap doesn’t show up on a spec sheet. At…
Most specifiers reach for XPS when they need below-grade moisture resistance. It’s the default choice on many drawings. But here’s what the trade literature doesn’t always emphasize: EPS retains its R-value longer over the service life of a building. That difference matters. A cold storage facility runs for 20 years, and every point of R-value…
The upfront price tag on Expanded Polystyrene (EPS) panels looks tempting until you calculate the refrigeration load for a clean room or cold storage facility. When you are speccing industrial modular structures, choosing between EPS vs Polyurethane SIPs is not just a material selection—it is a decision that dictates your operational energy costs for the…
The container housing sector has moved past the days of simply cutting a hole in a shipping box and calling it a home. The real engineering challenge now sits in how the structure deploys — and two competing mechanisms dominate: expandable and folding. Both claim speed, efficiency, and cost savings, but they solve opposite problems.…
Rising energy costs are gutting margins in modern cold storage, and conventional insulation often fails to meet stricter thermal codes without inflating wall thickness. Specifying PUF panels is not just about checking an R-value box on a spec sheet; it is about guaranteeing the building envelope performs a decade down the line without thermal bridging…
Prefabricated construction shifts building from a field craft to a manufacturing discipline by producing structural components in a controlled off-site facility. The market reflects this urgency, valued at USD 175.9 billion in 2025 and projected to nearly double by 2035. Procurement officers are moving past the old “temporary building” stigma to secure the speed and…
Most people assume dry rooms and cold rooms are interchangeable — they both control temperature, right? Wrong. One manages humidity; the other manages cold. Get the distinction wrong, and you’re looking at product spoilage, failed compliance inspections, or a HVAC system running at 110% capacity for no reason. We’ve seen it across food processing, pharma,…
Underestimating cold storage volume eats into profit margins faster than refrigeration costs. Most facility planners assume the external dimensions translate directly to pallet capacity, but that math ignores the physical reality of the building envelope. At RaxPanel, we factor in that a standard high-efficiency insulated panel system reduces internal clearances by roughly 200mm per wall,…
Most spec sheets rank EPS as the weakest rigid foam per inch. That assumption costs you money. At RaxPanel, we watch buyers reach for XPS on cold storage projects without running the full cost-per-R-value calculation. The EPS R-Value lands between R-3.6 and R-4.4 per inch, and it holds that number for decades. The foam is…
Particle control defines a cleanroom on paper, but humidity control defines it in operation. If you let relative humidity drop below 40%, static charges accumulate on insulating surfaces and destroy sensitive electronics components instantly. Most ISO 8 environments maintain a strict band between 45% and 65% RH to create a conductive moisture film that bleeds…