A truck body OEM in Texas shut down their assembly line for three days last March. Their new supplier had shipped structural foam panels with a 12% variance in PU core density across a single batch — enough to cause delamination during a 4-point bend test at their QC checkpoint. That density swing meant some…
A truck body manufacturer in Stuttgart halted their assembly line for three days last March. The cause was a shipment of acoustic ceiling panels with thickness variations of 2mm within a single unit. Fixtures wouldn’t clamp. Panel gaps broke the thermal seal on a refrigerated body. The supplier blamed tooling wear and offered a credit…
A refrigerated truck OEM in Germany rejected 340 HDPE panels last year because the cutting tolerance drifted past 1.5mm. The sheets warped during CNC routing. Edges melted. Thickness varied by 2mm across a single panel. That one rejection cost them €28,000 and three weeks of production downtime while they waited for a supplier who could…
Three months ago, a refrigerated truck builder in Stuttgart scrapped 340 formed panels in a single shift. Their supplier ran the thermoplastic sheets too hot during thermoforming, and the continuous fiber reinforcement washed out at every radius corner. Thickness readings at those bend points measured 1.3mm under spec. That one batch cost €87,000 in scrap…